Drawer Battery Box AA & AAA + storage for empty batteries

In stock · Made-to-order resin · Ships from Auckland · Free shipping over $75

Material

High-Detail Resin (8K)

Colour

Grey

Weight

~40 g

Print time

~4.5 h

Shipping

$10 std · $20 express

Lead time

1-3 d print + 1-4 d ship

!! ATTENTION You can't scale the model as the battery size needs to be kept. I would suggest to do min. 4 top layers as I only used 2 which definitely is not enough as you can see on the pictures. For the infill I did 8% Grid. You can go up to 10 - 15% if you like. Print duration would go up to around 6h45min. ###### Hello again. As I wanted to store my batteries in my table drawer I needed to create a model that would fit with a max height of 4,9cm. So I had to put the AA in a 45° angle. I reduced the amount of batteries to 20 x AA and 24 x AAA + space for 10 AA empty ones. I also wanted to safe some PLA as I didn't need the area around my AAA to be as high as for my AA (like in the original model). And I didn't need the top lid as it was in the drawer anyways. FACTS: Size of the box is 13.3cm x 15.3cm x 2cm 102g of PLA I used a 0.4n with a 0.24mm LH and 100 PS. Took me around 5h30min to print it. I will share the .gcode and .slt if you want to change the model as you cannot scale it. Please share your models and let me know your best settings :)