Opel Rockse Citroen Ami door cover - Opel Rocks-E und Citroen Ami Abdeckung für Tür mit / ohne Chiphalter
In stock · Made-to-order resin · Ships from Auckland · Free shipping over $75
- Material
- High-Detail Resin (8K)
- Colour
- Grey
- Weight
- ~40 g
- Print time
- ~4.5 h
- Shipping
- $10 std · $20 express
- Lead time
- 1-3 d print + 1-4 d ship
Der Opel Rocks-E und der Citroen Ami haben das Problem, dass es im Winter recht zugig ist. Der Fahrtwind sammelt sich in der Türgriffmulde und zieht durch das Schloss in die Tür. An der Lasche zum Schließen der Tür ist eine Öffnung. Dort strömt die kalte Luft heraus. Die Abdeckung schließt dieses Loch. Zusätzlich kann auch das Schloss mit Acryl abgedichtet werden. Die Abdeckung mit der Hakenkante in das Loch einsetzen und dann die Klipsseite kräftig bei drücken. Die Abdeckung sitzt stramm. ACHTUNG: Richtig herum einsetzen. Die Fase kommt nach oben zur Lasche. The Opel Rocks-E and the Citroen Ami have the problem that it is quite drafty in winter. The wind collects in the door handle recess and flows through the lock into the door. There is an opening on the tab to close the door. The cold air flows out there. The cover closes this hole. In addition, the lock can also be sealed with acrylic. Insert the cover with the hooked edge into the hole and then press the clip side firmly. The cover sits tight. ATTENTION: Insert the right way round. The bevel comes up to the tab.
View original model + STL files on Printables ↗
Frequently asked
How long does shipping take?
Opel Rockse Citroen Ami door cover - Opel Rocks-E und Citroen Ami Abdeckung für Tür mit / ohne Chiphalter is printed to order. Lead time is typically 1-3 business days plus 1-4 days NZ shipping. Standard NZ shipping is $10, free over $75.
What material is this printed in?
By default this is printed in High-Detail Resin (8K) at 0.025 mm layer height on an MSLA resin printer. Custom material and colour swaps are available, just leave a note at checkout.
Can I get this in a different colour?
Yes. Every product can be printed in any of the resin colours we stock, or hand-painted on request. Leave a note at checkout or email [email protected].
Do you ship outside of New Zealand?
Currently New Zealand only. Australian shipping is coming.
Who designed this?
Designed by an independent sculptor and licensed for commercial printing. The original is linked on this page.



