Strong vase mode garbage bin / can

In stock · Made-to-order resin · Ships from Auckland · Free shipping over $75

Material

High-Detail Resin (8K)

Colour

Grey

Weight

~40 g

Print time

~4.5 h

Shipping

$10 std · $20 express

Lead time

1-3 d print + 1-4 d ship

Thanks for choosing this model! It is: Quite sturdyDesigned to print using vase mode.A fast print (prints in under 2 ½ hours on a MK4).Remixable (with .step and .f3d files attached)Able to be used commercially / sold (see licence)I printed it with 0.6mm extrusion width for external perimeters (using a 0.4mm nozzle). To change extrusion width: Make sure you are in at least “advanced” mode; this is found in the upper right hand corner of PrusaSlicer.Go to print settings - advanced - extrusion width and change “External perimeters” to 0.6 Link to my old bin design: https://www.printables.com/model/635726-vase-mode-garbage-bin Happy printing! -Note- The original .gcode file was sliced with too high speed for the solid infill (I had to turn speed to 80% while printing the base). I plan to include a file that fixes that, but it will not be the exact same as the one i printed.